TERI 600 M – portable nail dust collector
230 € 184 €
Portable nail dust collector for manicure and pedicure with a centrifugal fan and a waterproof HEPA filter in front of it, so dust never passes through the motor.
- 50 W, 3 m/s suction, runs on mains or a Type-C power bank
- Airflow up to 230 m³/h, noise 70 dB
- Size 255×260×80 mm, weight 1500 g
- Removable stainless-steel grille on magnets
- 1-year warranty
TERI 600 M – portable nail dust collector
For nail technicians and salons. Place it on a level, stable surface so that it does not block the working area.
Why dust does not come back into the air
The HEPA filter sits in front of the fan, not behind it like a bag. It traps even the smallest dust particles – the most dangerous to health – keeps the fan and electronics clean, and a clogged filter never blows dust back out.
Filter care
Clean the filter after each client: remove it, shake the dust into a damp sink and rinse. The filter can be washed and treated with disinfectant solutions, but dry it thoroughly before use. Do not heat the filter above 90 °C. Replace the filter once a month, or sooner if suction decreases.
Power and operation
TERI 600 M is switched on and off with a switch. It runs on 230 V mains or on USB Type-C: use a power bank of at least 50 W with 15 V output and a working Type-C cable that supports this power. Disconnect the mains cable first, then connect the power bank.
Safety confirmed by a CE certificate of conformity.
Specifications
- Power: 50 W
- Power supply: 230 V / 50 Hz or Type-C 15 V
- Suction: 3 m/s
- Airflow: up to 230 m³/h
- Static pressure: up to 410 Pa
- Motor speed: 3800 rpm
- Noise level: 70 dB
- Dimensions (W×D×H): 255×260×80 mm
- Filter size (W×D×H): 190×220×20 mm
- Weight (complete set): 1500 g
- Packed weight: 2100 g
- Package size (L×W×H): 310×300×120 mm
- Warranty: 1 year
Included
- TERI 600 M nail dust collector
- Power cable
- TERI HEPA filter
- Stainless-steel grille
- User manual with warranty card
FAQ
How often should I clean the filter?
After each client: shake the dust into a damp sink and rinse; dry thoroughly before use. Replace it once a month, or sooner if suction decreases.
Can I use it without the filter?
No. Do not operate the dust collector without a filter, and do not place wipes on top: they restrict airflow and do not trap dust.
Can I repair it myself?
No: unauthorised interference with the construction or electrical circuit voids the warranty. Contact TERI service for repairs.
What is the warranty?
1 year (12 months); shipping for warranty repair or replacement is covered by TERI.
Does it run on a power bank?
Yes: use a power bank of at least 50 W with 15 V output and a working Type-C cable that supports this power.









Customer reviews
Reviews
There are no reviews yet.